Panasonic 27-inch Trim Kit, Stainless Steel, for use with 1.2 cu ft Mi

CHECK LATEST PRICE

Trim Kit Inner Size: 20-7/8″ (W) X 12-1/4″ (H). Installation Tools Needed – Measuring Tape, Pencil, Phillips Screwdriver, Ø 2 (5 /64″) Mm Drill. Required Cabinet Opening – 648Mm Or 25-1/2″ + 8Mm Or 5/16” – 0Mm (W) X 389Mm Or 15-5/16″ ± 2Mm Or 5/64” (H) X Minimum 533Mm Or 21″ (D); And Minimum 920Mm Or 36-1/4” From The Floor. Trim Kit Outer Size – 684Mm Or 27” (W) X 419Mm Or 16-1/2” (H) X 20Mm Or ¾” (D).

Features

Stainless Steel 27 Microwave Trim Kit compatible with 1.2 cu. ft. Panasonic Microwave models including NN-SN68KS, NN-SN67KS, NN-SN686SR, NN-SN686S, NN-SN67HSTTrim Kit Outer Size – 684mm or 27 (W) x 419mm or 16-1/2 (H) x 20mm or (D)Trim Kit Inner Size: 20-7/8 (W) x 12-1/4 (H)Required Cabinet Opening 648mm or 25-1/2 + 8mm or 5/16 0mm (W) x 389mm or 15-5/16 2mm or 5/64 (H) x minimum 533mm or 21 (D); and minimum 920mm or 36-1/4 from the floorInstallation tools needed – Measuring tape, pencil, Phillips screwdriver, 2 (5 /64) mm drill

See also  Gourmet Basics by Mikasa Kaylee 8-Piece Stainless Steel Hostess Serv

Is the 27 inch Panasonic microwave oven stainless steel?

Make sure this fits by entering your model number. Stainless Steel 27” Microwave Trim Kit compatible with 2.2 cu. ft. Panasonic Microwave Oven models including NN-SE9XXS, NN-SD9XXS, NN-SN9XXS

Which is Panasonic microwave oven trim kit do you use?

The Panasonic NN-TK922SS Trim Kit is designed for use only with the NN-SE9**S | NN-SD9**S | NN-SN9**S | Panasonic Microwave Ovens. For safety, unplug the microwave oven before attempting installation of the NN-TK922SS trim kit.

How big is a Panasonic countertop microwave oven?

Convert your Panasonic 1.2 cu. ft. countertop microwave oven to a built-in model with the Panasonic NN-TK621SS 27” microwave trim kit.

How big is the gap between the microwave and the trim kit?

There is a significant gap on the sides between the microwave the kit. The gap is about an inch. It would have looked much better if the space was more like 1/4- 3/8". Also, the base should be set so the microwave sits about 3/8"closer to the front as the face of the microwave is not flush with trim kit.